How To Ensure A Successful Flooring Job With Concrete

Everyone must have probably heard or read about the famous Leaning Tower of Pisa. In 1173, the foundations were laid too softly that it was not strong enough to support its weight hence the “leaning” part. Since then we have gone above and beyond in terms of avoiding such structural mistakes. However, it does not mean we are not immune to creating the same mistakes. Here are some tips to ensure a successful flooring job with concrete.

Laying New Concrete Coating

According to concrete Minneapolis experts, when laying a new coating of concrete it is important to note that surface preparation has a huge impact in both the aesthetic and functionality of the new flooring. Taking shortcuts at this point can mean a failure of the coating and an unavoidable increase in costs.

Avoid Nasty Surprises

In order to avoid any surprises, the contractor needs to remove the original covering or coating. Once, the subfloor is exposed we can now predict the condition of the concrete. Upon removal of the old flooring, the floor is then prepared for the next coating. At this point it is vital that both the customer and the contractor are in agreement on the type of flooring that will be laid.

According to ready mix concrete delivery Minnesota experts; there are a couple of methods that can be used so as to prep the floor for the new coat and these are shot blasting and grinding. Shot blasting is a good process that saves a lot of time as it propels the shot against the substrate which results in the best potential profile that the coating will stick to.

It is important to note however that this method may not be desirable if applying coatings of ten mils or lesser due to the overlap lines may be still seen which can ruin the look of the floor. In this case, grinding is the best recourse as it creates a much more even profile that thinner coatings can cover without much difficulty.


Read More

The Different Kinds Of Concrete Surfaces And Their Uses

Concrete is known as the most durable construction material on the planet so much so that it can be used practically anywhere and can be made to look just as beautiful as if it were carved from a precious rock quarry. Here are some of the different types of concrete surfaces and their corresponding usage.

Basement or Garage

According to concrete Minnesota experts, this type of concrete mixtures is perfect because they are built to withstand the structural flooring and therefore can take a lot of punishment without much in the way of maintenance. Cleaning the floor is easier as it is less delicate than other floors in the house. If you want to go the extra mile, apply a concrete sealer for best results.

Driveway and Parking

True to form most parking and driveway areas are usually either asphalt or concrete. An alternative albeit an expensive one at that is to use stone or bricks. Ready mix concrete delivery Minneapolis MN experts recommend concrete over all other construction materials is due to its penchant for being mixed or blended in such a way that it can withstand the heavy loads that rests upon it. You can finish off using a brush-textured finish giving it a rougher surface that can ensure good traction.


If you are on a budget or just want to be practical without sacrificing aesthetics for strength then use concrete for your patios. This material is not only less expensive but much quicker to customize depending on what you prefer.


They usually have the same strength as the ones used in walkways and patios.

Exterior Walkways

For walkways concrete can be used without spending too much in terms of making it look and feel better, the use of the concrete stamping approach allows you to apply any kind of texture you want. Do you want the look of wood or marble? Simple just apply the right…

Read More

The Importance of Timing Concrete Delivery and Curing Concrete

concrete delivery for a commercial site

When it comes to the process of installing concrete and timing of concrete delivery, curing is considered one of the most vital steps. Curing increases the strength of concrete as well as its durability. Here is how it happens. Concrete becomes hard due to hydration. However, this process only occurs if there is water and if the temperature stays within the suitable range. The process of curing occurs between 5 to 7 days after placement. During this time the surface needs to be kept moist in order to allow the hydration to proceed.

Hot or Cold Temperature When Concrete Delivery Occurs

According to concrete delivery expert Aggregate Minnesota, extreme temperature changes make it challenging to correctly cure concrete. For instance, on hot days a lot of water is obviously lost due to evaporation. On the other hand, if the temperature drops near freezing, hydration stops. When these conditions are present, concrete stops gaining strength. As a rule, the temperature of concrete should not be allowed to fall below 10 degrees Celsius.

Air Entrained Concrete

These are actually air pockets that release internal pressure on the concrete by providing it with billions of microscopic air cells per cubic foot. These air pockets expand when the it freezes. This type of concrete is created using air-entraining Portland cement. The volume of air injected is somewhere between 4 and 7 percent depending on conditions.

In order to produce a properly cured concrete one must first mix the right proportions. Ready mix concrete delivery recommends the rule of 6, which goes like this:

  • Minimum cement content of 6 bags per cubic yard of concrete
  • 6 gallons of water per bag of cement
  • Minimum of 6 days curing period
  • If the concrete is going to be exposed to freezing and thawing, an air content level of 6%

a timely concrete deliveryWhen it comes to the curing process and timing of concrete delivery, the first three days are the most critical as the concrete is going to permanently set during this time frame. Aside from spraying the area in order to keep it moist, you can also use some plastic sheeting to provide some additional protection. For bigger jobs, a process called ponding the area is warranted. This is done by using barriers around the perimeter of the freshly laid concrete in order to hold a certain amount of water.…

Read More

Best Bathroom Remodeling Advice

before and after bathroom remodelingPeople that are looking to upgrade the value of their property know that a bathroom remodeling is one of the sure fire ways to achieve that objective. Here is some bathroom remodeling advice you can take with you to the bank.

Know what can be DIY

re-tiling bathroom remodelingDIY or do-it-yourself is a practical measure a lot of homeowners resort to in order to reduce the bottom line. This can save a lot of money in the process as long as it is done correctly Do it wrong and you’re looking at a disaster in the making. Projects like painting and replacement of cabinet hardware and outlet covers can be done by the avid weekend warrior DIY aficionado. However, replacing and installing tile should only be done by a professional. Many homeowners opt to buy the materials themselves thinking they can save a dollar or two. However, it is best to talk with a contractor first to save you the trouble of buying the wrong kind of fixtures. The last thing you need is an oversized vanity set installed in the front of the bathroom doorway.

Set a Budget For Your Bathroom Remodeling Project

Many homeowners fall on the wayside when it comes to remodeling projects simply because they neglected to put a cap on their budgets. The same is true for folks that are just too stingy on the matter and end up buying cheap or substandard materials. Like any remodeling project, there are unexpected expenses that can come up. It would be wise to place a 10% buffer if the bathroom you want to upgrade is still relatively new while in older ones, a 25% buffer is usually necessary.

Hire the Right People

When it comes to bathroom remodeling it takes several disciplines to undertake the entire project. You will require a plumber, an electrician, flooring and framing specialists and even an interior design expert. There are contractors just like Milano Dezign that specialize in bathroom remodeling and have under their employ people skilled to perform the necessary tasks required. A lot of general contractors may hire subcontractors to take care of say, the plumbing or other tasks that require special skills.

Hire the right people for your bathroom remodeling

A lot of homeowners often act as the general contractor and decide which carpenter, electrician, plumber and tile installer to hire. If this is the route you want to take it is always advisable to get at least 3 estimates, check online reviews or get recommendations from colleagues, friends or family. It is important that the contractor you hire is duly certified, bonded and insured to perform the necessary work.

Cost Of The Bathroom Remodeling

When it comes to the cost of a bathroom remodel you need to understand that the average cost in 2016 for a typical bathroom upgrade is $11,364, this is based on data from the National Kitchen and Bath Association, around 20% goes to the labor expense. A survey by the same organization showed that half of people paid $10,000 and $29,999 for a bathroom facelift, while 31% paid more than thirty grand.

How To Go About It

If you are getting goose bumps from the sticker price, you need not worry. A typical bathroom remodel is not an all or nothing affair. You can reduce costs if you do not have the necessary budget by doing one step at a time. You can begin by simply upgrading the lighting and the ventilation followed by installation of a bathroom vanity or if you prefer, granite countertops. Just upgrade some features later when you do have the money.

While it is quite easy to replace a light or faucet, schedule some face time with your contractor to discuss big-ticket items like bathtub replacement or installation and repair and replace the tiles. It is recommended to do these tasks all at once so you can save a bit on labor fees.

When it comes to bathroom remodeling it is always wise to go for quality rather than quantity. It is quite a waste of time and money to purchase a cheap toilet that leaks the moment the floor is redone. To save some money, lookout for sales at the local hardware store or rebates on high quality materials.…

Read More


If you want to know of the social sites then always you take the help of the young boy or girl from your house. You believe them most as you think that they are your greatest teachers than anyone else. For sure the social sites play a major role in shaping up their career but remember one thing. The way the social sites are made is mainly due to the needs of the present generation. Without targeting them their business will not run.

From making the internet sites as the best place for trading; to the applications for the Smartphones are all made by them. They showed the world that social sites on the internet are not the means of only time pass. They showed the world that the web sites are the best places to trade for. If still, anyone has the doubt that the internet sites play a major role in shaping them then he/she must think twice?


If it is said that the internet sites change their way of thinking and style of living, then one must think of the fact that they have introduced the introduced the internet sites in a new way. So what do you want to know?

Read More